--- title: "Drive-In Rack in Newark, OH | Free Quote" url: https://columbuspalletrack.com/service-area/newark/drive-in-rack description: "Drive-In Rack in Newark, OH. Free design consultation, layout planning and installation sized to your storage needs. Request a quote." lang: en --- Image: Drive-In Rack system for Newark, Ohio warehouses (https://columbuspalletrack.com/__l5e/assets-v1/d993c241-0fdb-4341-bc5e-2ee1c06724a2/drive-in-hero.jpg) Newark, Ohio # Drive-In Rack in Newark, OH Drive-in rack gets asked about in Newark when an operation is holding a lot of one SKU — bulk buffer stock or seasonal volume — and the floor space going into aisles between pallets starts to feel wasteful. Regional distributors and industrial manufacturers around Newark Industrial Park and the Port Authority campus along Thornwood Drive are the ones most likely to carry that kind of load. A forklift drives directly into the rack structure and sets pallets on continuous rails rather than individual beam levels, so one lane holds pallet after pallet at the same elevation with no aisle between them. Opening a single end of the lane gives the most positions per square foot but runs last in, first out; opening both ends gives up a few positions for first-in, first-out access. 614-379-4436 ## Why Newark Warehouses Work With Us Buildings along the SR-16 corridor near the Heath-Newark-Licking County Port Authority carry different column grids depending on when they were built, and drive-in rail depth has to be set against the actual column spacing rather than a standard lane length. Newark's regional distributors and industrial manufacturers around Newark Industrial Park and the Port Authority campus typically carry large volumes of a small number of SKUs, which is the load pattern that makes drive-in worth trading individual pallet access for density. Based in Licking County, rail depth, column spacing and forklift clearance for a drive-in system get checked against the real building before steel is ordered, since drive-in lanes are unforgiving of a layout off by even a few inches on rail width. We keep site notes and measurements on file after the first visit to Newark, so a follow-up visit or a later phase of the same project does not start from a blank sheet. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Drive-in pallet rack lanes fitted with continuous rails (https://columbuspalletrack.com/assets/drive-in-pallet-rack-Cg418ibV.jpg) Image: Drive-in warehouse racking loaded with bulk pallets (https://columbuspalletrack.com/__l5e/assets-v1/d993c241-0fdb-4341-bc5e-2ee1c06724a2/drive-in-hero.jpg) ### Operations We Rack Around Here Nearby areas we work in regularly include the SR-16 / Licking County corridor, Newark Industrial Park, Heath-Newark-Licking County Port Authority, Thornwood Drive, SR-16 corridor. Data center supply chain Industrial manufacturing Distribution Aerospace and defense ## How Drive-In Rack Works Storage lanes replace internal access aisles. Forklifts enter the structure to handle bulk pallets. 1 ### Continuous rails, not beams Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation. 2 ### The truck enters the lane The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one. 3 ### One open end or two One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides. 4 ### Guarding built into the design Guide rails, column guards, and rail-end protection are part of the spec from the start, because lift trucks enter the structure during loading and retrieval. ## What a Newark Drive-In Rack Project Includes A drive-in rack project for a Newark building starts with the pallet load: dimensions, weight, how many SKUs need bulk lanes, and whether the operation can work with last-in-first-out access or needs both ends open. Those answers set rail depth, lane count and column spacing. The forklift drives into the structure and sets pallets on continuous rails rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation with no aisle between positions. Driver clearance inside the lane has to match the forklift in use, since a mismatch there is a common cause of rack damage in drive-in systems. For buildings around Newark Industrial Park and the Port Authority campus along Thornwood Drive, lane depth and column spacing are drawn against the building's clear height and existing grid, then compared to a selective layout on the same footprint so the density gain is visible against the loss of per-pallet access. Installation crews anchor frames and rails to the floor, verify rail alignment down the full lane depth before loading begins, and label each lane with its rated capacity and access direction. Later changes to lane count or depth are drawn off the original layout. Any revisions to the layout after the initial walkthrough are priced and documented before steel is ordered, so the scope stays tied to what was actually measured on site. High volume of a small number of SKUs Seasonal or buffer inventory held in bulk Cold storage and freezer rooms where cube matters most Product too fragile to floor-stack more than two high Buildings where floor space, not height, is the binding constraint Call 614-379-4436: 614-379-4436 ## Recent Installations Racking projects completed for warehouses across Central Ohio. Image: Drive-in pallet rack system installed in a warehouse (https://columbuspalletrack.com/__l5e/assets-v1/d7a1c8ca-95d3-4a6b-8b88-5669bc50d8d3/project-drive-in.jpg) Drive-in pallet rack Image: Carton flow rack bays with gravity roller beds (https://columbuspalletrack.com/__l5e/assets-v1/deec70bc-f9a9-41d1-88e1-d84430debeb4/project-carton-flow.jpg) Carton flow rack Image: Tall selective pallet rack rows with wire decking (https://columbuspalletrack.com/__l5e/assets-v1/271fad9a-8e01-457f-a6c4-75439a9d25e9/project-tall-rack.jpg) Selective pallet rack Image: Warehouse aisle of selective pallet rack with wire decking (https://columbuspalletrack.com/__l5e/assets-v1/ec800b34-138d-4836-a196-417aff315ecf/project-wire-deck-aisle.jpg) Selective pallet rack with wire decking Image: Newly installed pallet rack rows in an empty warehouse (https://columbuspalletrack.com/__l5e/assets-v1/f9fc12ed-f6ce-48b2-9231-7e5ab2753d05/project-new-install.jpg) New warehouse rack installation Image: Long rows of green and orange selective pallet rack (https://columbuspalletrack.com/__l5e/assets-v1/7560812c-2620-4b02-85f7-8cd166efd7ac/project-green-rack-row.jpg) Selective pallet rack rows Image: Wide view of a warehouse racking layout with wire decking (https://columbuspalletrack.com/__l5e/assets-v1/90e388f8-26ca-4b39-b234-547fd3a0a2b8/project-wide-warehouse.jpg) Warehouse racking layout Image: Multiple rows of pallet rack in a distribution warehouse (https://columbuspalletrack.com/__l5e/assets-v1/83b45cb8-2809-41fc-9763-ff5f1024e2f1/project-rack-rows.jpg) Pallet rack rows Image: Cantilever rack with orange arms installed against a warehouse wall (https://columbuspalletrack.com/__l5e/assets-v1/59422abf-d14c-465d-90c7-e4a16a1ceafb/project-cantilever.jpg) Cantilever rack Image: Push back pallet rack carts and rails installed in a cold storage room (https://columbuspalletrack.com/__l5e/assets-v1/1d567c1f-c824-4abe-a66e-8435f7c784ba/project-push-back.jpg) Push back pallet rack View More Projects: https://columbuspalletrack.com/projects ## Get a Drive-In Rack Quote for Your Newark Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436. ### Columbus Pallet Rack 4551 Wright Ave. Unit #2092 Columbus, OH 43213 614-379-4436 Monday - Friday: 8:00 AM - 6:00 PM ## Drive-In Rack Questions We Hear Most ### What type of pallet rack do I need? ### What aisle width do I need? ### How much weight can pallet rack hold? ### How long does it take to get and install pallet rack? ## Warehouse Storage Services in Newark ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://columbuspalletrack.com/service-area/newark ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://columbuspalletrack.com/service-area/newark/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://columbuspalletrack.com/service-area/newark/pallet-flow-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://columbuspalletrack.com/service-area/newark/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://columbuspalletrack.com/service-area/newark/carton-flow-rack ### Warehouse Relocation Moving buildings without losing the racking plan that already works for your operation. View details https://columbuspalletrack.com/service-area/newark/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers Central Ohio, so one team can handle multiple buildings for the same company. Drive-In Rack in Columbus: https://columbuspalletrack.com/service-area/columbus/drive-in-rack Drive-In Rack in Westerville: https://columbuspalletrack.com/service-area/westerville/drive-in-rack Drive-In Rack in Reynoldsburg: https://columbuspalletrack.com/service-area/reynoldsburg/drive-in-rack Drive-In Rack in Gahanna: https://columbuspalletrack.com/service-area/gahanna/drive-in-rack Drive-In Rack in Lancaster: https://columbuspalletrack.com/service-area/lancaster/drive-in-rack Drive-In Rack in Pickerington: https://columbuspalletrack.com/service-area/pickerington/drive-in-rack View All Service Areas: https://columbuspalletrack.com/service-area ## Where We Work Located in Columbus, we serve the entire Greater Columbus region with industrial pallet racks and warehouse storage solutions. ### Columbus Pallet Rack #### Address 4551 Wright Ave. Unit #2092 Columbus, OH 43213 #### Phone 614-379-4436 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Drive-In Rack in Newark? Call 614-379-4436 or request a quote and we will get a layout started. 614-379-4436 Call Now: 614-379-4436 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://columbuspalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://columbuspalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Newark", "item": "https://columbuspalletrack.com/service-area/newark" }, { "@type": "ListItem", "position": 4, "name": "Drive-In Rack", "item": "https://columbuspalletrack.com/service-area/newark/drive-in-rack" } ] }, { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://columbuspalletrack.com/#business", "name": "Columbus Pallet Rack", "url": "https://columbuspalletrack.com", "telephone": "614-379-4436", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "4551 Wright Ave. Unit #2092", "addressLocality": "Columbus", "addressRegion": "OH", "postalCode": "43213", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?cid=12345472861858640537&output=embed", "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ], "areaServed": [ { "@type": "City", "name": "Columbus", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Dublin", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Westerville", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Grove City", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Hilliard", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Reynoldsburg", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Gahanna", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Delaware", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Marysville", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Lancaster", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Newark", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Pickerington", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Canal Winchester", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "Obetz", "containedInPlace": { "@type": "State", "name": "Ohio" } }, { "@type": "City", "name": "West Jefferson", "containedInPlace": { "@type": "State", "name": "Ohio" } } ] }, { "@type": "Service", "@id": "https://columbuspalletrack.com/service-area/newark/drive-in-rack#service", "url": "https://columbuspalletrack.com/service-area/newark/drive-in-rack", "name": "Drive-In Rack in Newark, OH", "serviceType": "Drive-In Rack", "description": "Drive-In Rack in Newark, OH. Free design consultation, layout planning and installation sized to your storage needs. Request a quote.", "provider": { "@id": "https://columbuspalletrack.com/#business" }, "areaServed": [ { "@type": "City", "name": "Newark", "containedInPlace": { "@type": "State", "name": "Ohio" } } ] } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What type of pallet rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking." } }, { "@type": "Question", "name": "What aisle width do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Aisle width is set by the lift truck: counterbalance trucks typically need about 12–13 feet, reach trucks about 8–10 feet and very-narrow-aisle equipment about 5–6 feet. We confirm actual truck specifications and load dimensions; aisle width has a major effect on storage density." } }, { "@type": "Question", "name": "How much weight can pallet rack hold?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single capacity: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and capacities go on load plaques." } }, { "@type": "Question", "name": "How long does it take to get and install pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Standard teardrop sizes often quick-ship, while high-density systems and non-standard sizes take longer; lead time is confirmed on the quote. Installation time depends on bay count and site readiness, and we schedule it around the approved layout and your operation." } } ] } ] ```