How much does pallet flow rack cost in West Jefferson?

Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote.

How much weight can pallet rack hold?

There is no single capacity: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and capacities go on load plaques.

Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

What type of pallet rack do I need?

Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking.

West Jefferson, Ohio

Pallet Flow Rack in West Jefferson, OH

In West Jefferson, a rotation problem is rarely visible until a lot gets pulled from the back of a stack and someone finds out it predates the pallet in front of it. Floor stacking and even standard selective rack both rely on a person remembering what came in first, and that breaks down the moment volume climbs. Pallet flow rack removes the guesswork by loading pallets at the high end of a lane and letting gravity roll the oldest one forward to the pick face automatically.

Operators running e-commerce fulfillment, bulk distribution and freight handling near I-70, US-40 and Columbus Logistics Park West usually have a short list of SKUs that move in real volume and carry dates, lots or shelf life that cannot be mishandled. A flow lane built around those SKUs turns rotation from a procedure your team has to remember into something the rack enforces on its own, every time a pallet is pulled.

614-379-4436

Why West Jefferson Warehouses Work With Us

Buildings around I-70 and US-40 vary in clear height, and flow lanes need an aisle on both the load end and the pick end, so the layout has to account for that extra access space before a single roller is specified.

West Jefferson operators in e-commerce fulfillment, bulk distribution and freight handling typically have a handful of fast-turning, date-sensitive SKUs representing most of their volume. That is the profile where flow pays for itself fastest, since a few deep lanes behind a small number of pick faces can represent a large share of stored product.

Pallet condition matters more here than in most other systems, and freight moving through I-70, US-40 and Columbus Logistics Park West does not always arrive on pristine pallets. Specifying full-width rollers instead of spaced tracks where pallets are rough keeps the lane running without hang-ups. Because the rollers and brakes are matched to the exact pallet weight moving through the lane, travel speed stays consistent even as case counts on a pallet vary from one receipt to the next.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Nearby areas we work in regularly include the I-70 west corridor, West Jefferson Commerce Park, SR-142 industrial, Lilly Chapel Road, I-70 logistics corridor.

E-commerce fulfillment

Bulk distribution

Freight handling

Light manufacturing

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What a West Jefferson Pallet Flow Rack Project Includes

Design starts with what is actually moving through the lane: pallet weight, bottom-board condition, and how many pallets of each SKU pass through in a typical cycle for a West Jefferson operation near I-70, US-40 and Columbus Logistics Park West. Separator spacing is set so pallets do not bunch against each other mid-travel, which protects both the load and the rail underneath it.

From there we set lane count and depth against that throughput. Fewer, deeper lanes store more; more, shallower lanes give the pick face more SKU variety, and both get modeled with a position count for e-commerce fulfillment, bulk distribution and freight handling freight moving through I-70 and US-40. Brake roller placement is confirmed against pallet weight before the lane is loaded for the first time.

The quote covers frames, beams, roller or wheel-track assemblies, brakes, separators and entry and exit guides, itemized so the added cost per position is visible against a selective or pushback alternative.

At installation the crew sets lane pitch, tests loaded travel pallet by pallet, and tunes the brake rollers before the system goes live. A lane map goes to your team afterward, and lanes can be re-pitched if case sizes or pallet weights shift.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Pallet Flow Rack Quote for Your West Jefferson Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.