Cantilever Rack in West Jefferson, OH
Pallet rack has a front beam, and long material does not fit around one. In West Jefferson, operations handling e-commerce fulfillment, bulk distribution and freight handling end up leaning pipe, bar stock or sheet goods against a wall or floor-stacking bundles where forklifts have to steer around them near I-70, US-40 and Columbus Logistics Park West. Cantilever rack solves that by extending arms out from a column with nothing across the front, so bundles load and unload from the side instead of needing to clear a beam.
The length of what you are storing, not its weight or how many SKUs you carry, is what drives this decision for freight moving through I-70 and US-40. Once material sitting on the floor near a dock door gets moved onto arms sized to it, the same square footage in a West Jefferson building opens up for everything else.
Why West Jefferson Warehouses Work With Us
West Jefferson buildings near I-70, US-40 and Columbus Logistics Park West that handle e-commerce fulfillment, bulk distribution and freight handling often have long or irregular material mixed in with standard pallets, and cantilever is the only system that gets that material off the floor without needing a beam in front of it.
Arm length, column spacing and base depth all follow the bundle dimensions actually moving through I-70 and US-40, so a run sized for lumber looks nothing like one sized for coiled tube or bar stock, even in the same building.
Single-sided runs work well against a wall in a West Jefferson facility with limited floor, while double-sided runs standing in open floor near I-70, US-40 and Columbus Logistics Park West double the capacity per base without doubling the footprint. Arm levels can be repositioned at set increments on the column, so a run built for one bundle length can be adjusted without replacing the columns themselves.
Operations We Rack Around Here
Nearby areas we work in regularly include the I-70 west corridor, West Jefferson Commerce Park, SR-142 industrial, Lilly Chapel Road, I-70 logistics corridor.
How Cantilever Rack Works
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
Columns and anchored bases
Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.
Arms at adjustable heights
Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.
Column spacing against sag
Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.
Single-sided or double-sided
Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.
What a West Jefferson Cantilever Rack Project Includes
Specification starts with the load: bundle dimensions including length, weight per bundle, and how material is handled, whether by forklift forks, a side loader or by hand off a cart, for a West Jefferson operation near I-70, US-40 and Columbus Logistics Park West. Inclined arms fitted with a lip get specified wherever round stock would otherwise be able to roll forward off a straight arm.
From there column height and spacing get set so bundles do not sag between arms, and straight or inclined arms are chosen depending on whether the load is boxed, banded or round stock moving through I-70 and US-40. Base depth is rechecked against arm length so an off-center pick does not tip the load of the run.
The quote itemizes columns, bases, arms, bracing and anchors, with a layout showing the run, arm levels and rated capacity per arm for e-commerce fulfillment, bulk distribution and freight handling freight specific to West Jefferson. Capacity per arm level is labeled on the layout so staff loading long bundles near I-70 and US-40 know the limit at a glance without checking a separate sheet.
Installation partners anchor bases to the floor, plumb the columns, brace the run and set arm elevations to the drawing. Arms can be repositioned later at set increments as the product mix handled near I-70, US-40 and Columbus Logistics Park West changes.
Recent Installations
Racking projects completed for warehouses across Central Ohio.
Get a Cantilever Rack Quote for Your West Jefferson Warehouse
Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.
Columbus Pallet Rack
4551 Wright Ave.
Unit #2092
Columbus, OH 43213
614-379-4436Monday - Friday: 8:00 AM - 6:00 PM
Cantilever Rack Questions We Hear Most
Warehouse Storage Services in West Jefferson
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Storage lanes replace internal access aisles. Forklifts enter the structure to handle bulk pallets.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Moving buildings without losing the racking plan that already works for your operation.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers Central Ohio, so one team can handle multiple buildings for the same company.
Where We Work
Located in Columbus, we serve the entire Greater Columbus region with industrial pallet racks and warehouse storage solutions.
Columbus Pallet Rack
Address
4551 Wright Ave.
Unit #2092
Columbus, OH 43213
Phone
614-379-4436Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Cantilever Rack in West Jefferson?
Call 614-379-4436 or request a quote and we will get a layout started.