Do you handle permits?

Our team handles the permit side for you.

Can I add on to my existing pallet rack?

Usually, if the connections match; teardrop is not universal across manufacturers. Send a photo of the upright face, beam connector and any label so we can identify a compatible connection before quoting new components.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width and your forklift. Our free CAD layout gives the exact count for the proposed configuration before you buy.

Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

Columbus, Ohio

Warehouse Relocation Services in Columbus, OH

Moving a warehouse near the I-70/I-270 loop means more than trucking boxes from one dock to another — the racking has to come down, get labeled by row and beam elevation, travel without losing hardware, and go back up in a layout that fits the new building rather than just repeating the old one. For third-party logistics, retail distribution and food and beverage operations near Rickenbacker, West Broad industrial and the Northeast Corporate Park relocating into a different footprint, that mismatch between old and new clear height or column spacing is usually where a move stalls.

We coordinate teardown, labeling, transport and reinstallation as one project rather than splitting it between a moving company and a rack installer. Where the new building's clear height or column spacing differs from the one you're leaving near Rickenbacker, we draw a revised layout and add new rack where the old steel doesn't fill the space.

614-379-4436

Why Columbus Warehouses Work With Us

A Columbus relocation rarely moves between two identical buildings. Column spacing, clear height and dock positions near the I-70/I-270 loop almost always differ at least slightly from the building you're leaving, which means a straight reinstall of the old layout usually leaves positions on the table. We draw the new layout from the new building's actual dimensions instead of assuming the old plan still fits.

third-party logistics, retail distribution and food and beverage operations near Rickenbacker tend to be running during the move, not shut down for it, so teardown and reinstallation get phased around what still needs to ship. Rows get labeled by beam elevation and frame depth before anything comes down, so reassembly at the new site near Groveport Road doesn't turn into guesswork about which beam belonged where.

That coordination matters most for larger relocations near Rickenbacker, West Broad industrial and the Northeast Corporate Park, where a delay in paperwork can hold up reinstallation after the steel has already arrived.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet rack components and warehouse storage layout

Warehouse racking rows for relocation layout planning

Operations We Rack Around Here

Nearby areas we work in regularly include the I-70 / I-270 loop, Rickenbacker, West Broad industrial, Northeast Corporate Park, Groveport Road.

Third-party logistics

Retail distribution

Food and beverage

Light manufacturing

How Warehouse Relocation Works

Moving buildings without losing the racking plan that already works for your operation.

New building layout first

Before anything comes down at the current site, we measure the new building's clear height, column spacing, and dock positions and draw a CAD layout sized to that space, so the relocation has a destination plan rather than a plan to recreate the old footprint.

Labeled teardown

Frames, beams, and connectors are tagged by bay and row as they come down, sequenced around whatever the old building is still shipping or receiving, so nothing comes apart as an unsorted pile of steel.

Transport coordination

Labeled components move between sites on a schedule tied to the new layout, so beams and frames arrive grouped by the bay they're going back into instead of needing to be re-sorted on arrival.

Reinstallation to the new layout

Crews anchor, plumb, and level every frame against the new CAD drawing, re-hang decking and guarding, and post capacity tags for the finished rows.

What a Columbus Warehouse Relocation Project Includes

A relocation project for a Columbus operation starts with surveying both buildings — clear height, column spacing, dock layout and clear height at the new site near the I-70/I-270 loop, compared against what you're leaving. That comparison determines how much of the existing rack carries over as-is and where the layout needs to change.

Teardown crews disassemble rows methodically, labeling frames, beams and connectors by their original row and elevation so nothing gets mismatched in transit. Transport is coordinated so steel arrives at the new building near Rickenbacker, West Broad industrial and the Northeast Corporate Park in the sequence reinstallation needs it, rather than as one undifferentiated load.

Where the new footprint near Rickenbacker has different clear height or column spacing, we revise the layout in CAD and add new rack to fill positions the old steel can't cover — mixing new frames and beams into the reused system is common rather than the exception.

Reinstallation follows the revised drawing: crews anchor, plumb and level every frame, relabel bays, and post capacity tags before handing the building back to your team near Groveport Road. Afterward you keep one point of contact for the inevitable adjustments once inventory is back on the shelf.

Operations relocating between Columbus-area buildings with different clear heights

Leases ending on a timeline that requires the current warehouse vacated

Facilities consolidating two buildings into one new location

Companies that want existing rack reused rather than replaced outright

Operations adding new rack positions as part of the move

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Warehouse Relocation Quote for Your Columbus Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.