Do you handle permits?

Our team handles the permit side for you.

Can I add on to my existing pallet rack?

Usually, if the connections match; teardrop is not universal across manufacturers. Send a photo of the upright face, beam connector and any label so we can identify a compatible connection before quoting new components.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width and your forklift. Our free CAD layout gives the exact count for the proposed configuration before you buy.

Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

Gahanna, Ohio

Warehouse Relocation Services in Gahanna, OH

A rack system built for one building rarely drops straight into another, and that's the problem every Gahanna warehouse relocation runs into first. Buildings near Taylor Station Road and Morrison Road vary in column grid, clear height and dock count, so steel that fit the old address has to be checked against the new one before anyone plans to reuse it as-is. Since Gahanna sits next to John Glenn Columbus International Airport, several of these moves involve shifting an air cargo or freight forwarding operation between buildings with very different dock configurations.

The project covers teardown and labeling of the existing system, coordinating how it gets from the old site to the new one, redrawing the layout against the new building's actual dimensions, and reinstalling once the space is ready.

614-379-4436

Why Gahanna Warehouses Work With Us

Most Gahanna relocations happen because the old building ran out of room, not because the rack itself was wrong for the job. That distinction matters for the new layout: steel sized for a cramped Taylor Station Road building might be exactly right once it's redrawn against the wider column spacing of a new site along Gahanna Industrial Parkway.

Air freight forwarders, aerospace suppliers, medical distributors and electronics importers near the airport corridor often run equipment that has to go back together in a particular sequence, so teardown is done row by row with every frame, beam and connector tagged for its new position before it leaves the old building. Skipping that step turns reassembly into guesswork on the other end.

A relocation touches layout planning, transport and reinstallation at the same time, so the schedule is built around when the new building will actually be ready rather than around a moving truck's calendar. For an operation moving within the airport corridor, that usually means lining up the new layout well before the first frame comes down at the old address.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet rack components and warehouse storage layout

Warehouse racking rows for relocation layout planning

Operations We Rack Around Here

Nearby areas we work in regularly include the airport / Morrison Road corridor, Gahanna Industrial Parkway, Taylor Station Road, Morrison Road, Airside Business Park.

Air freight and forwarding

Aerospace parts

Medical distribution

Electronics

How Warehouse Relocation Works

Moving buildings without losing the racking plan that already works for your operation.

New building layout first

Before anything comes down at the current site, we measure the new building's clear height, column spacing, and dock positions and draw a CAD layout sized to that space, so the relocation has a destination plan rather than a plan to recreate the old footprint.

Labeled teardown

Frames, beams, and connectors are tagged by bay and row as they come down, sequenced around whatever the old building is still shipping or receiving, so nothing comes apart as an unsorted pile of steel.

Transport coordination

Labeled components move between sites on a schedule tied to the new layout, so beams and frames arrive grouped by the bay they're going back into instead of needing to be re-sorted on arrival.

Reinstallation to the new layout

Crews anchor, plumb, and level every frame against the new CAD drawing, re-hang decking and guarding, and post capacity tags for the finished rows.

What a Gahanna Warehouse Relocation Project Includes

Planning starts with the new building: its column grid, clear height and dock positions get reviewed to figure out what the existing rack can carry over and where the layout needs something different for air cargo or freight forwarding traffic that moves on its own schedule near the airport.

Teardown at the old Gahanna site happens in sequence, with frames, beams and connectors labeled by row and bay as they come apart, so reassembly doesn't turn into sorting mismatched steel by trial and error on the other end. Transport gets coordinated so components show up at the new building in the order the installation crew actually needs them.

Where the new layout calls for more rack than what's moving over, that additional steel is ordered and scheduled alongside the relocated components so the project isn't waiting on a single missing piece.

Reinstallation follows the new layout drawing: frames are anchored, plumbed and leveled, beams go in at the elevations the new building calls for, and locations get relabeled with fresh capacity tags so the floor crew isn't relying on memory from the old address. What comes out of it is a system built for the building it's actually in, not a copy of the one left behind near Taylor Station Road.

Operations relocating between Columbus-area buildings with different clear heights

Leases ending on a timeline that requires the current warehouse vacated

Facilities consolidating two buildings into one new location

Companies that want existing rack reused rather than replaced outright

Operations adding new rack positions as part of the move

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Warehouse Relocation Quote for Your Gahanna Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.