Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

What type of pallet rack do I need?

Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking.

How much weight can cantilever rack hold?

There is no single rating: arm capacity depends on arm length and specification, while column capacity depends on height and the loads carried across the run. We size arms and columns to your heaviest bundle and post the finished capacities on load plaques.

How much does pallet rack cost?

Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote.

Hilliard, Ohio

Cantilever Rack in Hilliard, OH

A pallet rack beam running the width of a bay gets in the way the moment the load is longer than the bay itself. Pipe, tube, bar stock and bundled material near Roberts Road industrial area usually end up leaned against a wall or stacked on the floor instead, both of which put product in the forklift's path. Cantilever arms extend from a column with an open front, so long stock loads from the side without clearing anything first.

HVAC and plumbing supply and light manufacturing operations around Hilliard that currently store long stock on the floor are the ones who tend to call. Arm length, load rating and column spacing get set from the bundles crossing buildings along Hilliard Industrial Parkway and Britton Parkway, not from a generic arm length applied across every project.

614-379-4436

Why Hilliard Warehouses Work With Us

Length rather than weight is what rules out a standard beam level, and Hilliard buildings carrying HVAC and plumbing supply inventory typically have that kind of load sitting on the floor near Roberts Road industrial area instead of racked.

A single-sided run works along a wall near Hilliard Industrial Parkway where perimeter space is tight; a double-sided run in open floor near Britton Parkway loads from both faces and roughly doubles capacity per base without widening the footprint.

How material gets handled — forklift forks, a side loader, or by hand off a cart near Trueman Boulevard — determines how far apart columns can be spaced before a bundle sags between arms, so that detail gets confirmed before arm length is set.

If you need to move five racks of cantilever arms to a Grove City site, our relocation service manages the teardown and re-bolting process. We transport the components through Reynoldsburg, checking that every connector and pin meets current standards at the Hilliard facility so your lumber or pipe storage remains secure and accessible immediately following the equipment shift.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the I-270 west / Roberts Road corridor, Hilliard Industrial Parkway, Britton Parkway, Roberts Road, Trueman Boulevard.

Wholesale distribution

HVAC and plumbing supply

Sporting goods

Light manufacturing

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Hilliard Cantilever Rack Project Includes

Specification starts with the load: bundle dimensions including length, weight per bundle, and how the material is handled on the floor near Roberts Road industrial area. Those answers set arm length, arm capacity and the clearance needed at each level.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock like pipe or tube from rolling forward. Single-sided runs get positioned along a wall near Hilliard Industrial Parkway; double-sided runs get aisle widths matched to whatever equipment is moving material in and out near Britton Parkway.

The quote itemizes columns, bases, arms, bracing and anchors, with a drawing showing the run, arm levels and the rated capacity posted per arm. Installation anchors the bases, plumbs the columns, braces the run and sets arm elevations to match the drawing.

What is left standing is a run of arms that can be repositioned as the product mix near Hilliard changes, capacity ratings posted at every level, and floor space that long material used to occupy now open for other use.

Arm elevations and rated capacities get marked on the run drawing, so repositioning an arm or adding a bay near Britton Parkway in Hilliard works from that record instead of a field guess.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Cantilever Rack Quote for Your Hilliard Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.