Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

What type of pallet rack do I need?

Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking.

How much weight can cantilever rack hold?

There is no single rating: arm capacity depends on arm length and specification, while column capacity depends on height and the loads carried across the run. We size arms and columns to your heaviest bundle and post the finished capacities on load plaques.

How much does pallet rack cost?

Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote.

Gahanna, Ohio

Cantilever Rack in Gahanna, OH

Long material is the one thing standard pallet rack in Gahanna was never built to hold. Buildings near Taylor Station Road and Morrison Road in Gahanna serve air freight forwarders, aerospace parts suppliers, medical distributors and electronics importers, and the day-to-day strain shows up the same way almost every time: lumber-length conduit and tubing for electronics assembly leaning against a wall because standard pallet rack has nowhere to put anything longer than a pallet. Gahanna sits next to John Glenn Columbus International Airport, so a share of the buildings along Taylor Station Road and Morrison Road were built around trucks feeding or pulling from air cargo rather than a typical over-the-road dock schedule. Our cantilever designs recover lost vertical space near Taylor Station Road, keeping long aerospace or air freight components organized without needing a larger airport-adjacent lease.

Planning a successful installation requires analyzing your actual airport-bound freight first: we measure every pallet profile and lift truck spec to ensure the steel performs under real-world pressure near Taylor Station Road. Those numbers determine whether cantilever rack actually fits the way Gahanna needs it to, and a layout with a price comes back before any steel is ordered for a building along the airport corridor.

614-379-4436

Why Gahanna Warehouses Work With Us

Gahanna buildings along Taylor Station Road and Gahanna Industrial Parkway range from decades-old low-bay construction to recent shells with taller clear heights, and a cantilever rack layout drawn for one rarely drops into the other without rework. Every bay is configured to work around your Taylor Station Road facility’s unique column spacing and overhead obstructions, ensuring no storage position is lost to poor planning near the airport.

Air freight forwarders, aerospace parts suppliers, medical distributors and electronics importers working out of Airside Business Park generally store lumber-length conduit and tubing for electronics assembly leaning against a wall, and a cantilever rack lane has to be built around that exact profile rather than a general-purpose one. That early decision on rotation and depth is what keeps a Gahanna operation from revisiting the project months later to fix handling problems it created.

Given how often lumber-length conduit and tubing for electronics assembly leaning against a wall because standard pallet rack has nowhere to put anything longer than a pallet appears in airport corridor buildings, the layout work accounts for how trucks and lift equipment actually move through the dock, not only how many rack positions fit on a floor plan. That's the difference between a cantilever rack project in Gahanna that holds up under daily handling and one that looks right on paper but creates new bottlenecks once it's loaded.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the airport / Morrison Road corridor, Gahanna Industrial Parkway, Taylor Station Road, Morrison Road, Airside Business Park.

Air freight and forwarding

Aerospace parts

Medical distribution

Electronics

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Gahanna Cantilever Rack Project Includes

A Gahanna cantilever rack project begins by pinning down the load: what it is, how much it weighs, how much clear height the building gives up before an obstruction, and which lift truck handles it. Those figures set the lane depth, beam elevation and bay spacing before a layout drawing is started.

Arms extend out from a column with nothing in front to block loading, so long or oddly shaped material can be set down or lifted off from either side without threading it between upright posts. The column spacing and arm length get sized to the longest piece you actually handle, not a standard increment. A layout then shows bay and lane dimensions, aisle widths and a position count, so the gain over the current floor storage or outdated rack is visible before anything is committed to steel.

Once the drawing is approved, ordering and installation for cantilever rack follow it bay by bay: frames anchored and plumbed, the components particular to cantilever rack installed at the specified elevations, and a capacity tag posted on every lane.

After the system is up, the same crew handles additional bays, reconfiguration if pallet sizes or SKU counts change, and replacement of any frame or rail damaged by a lift truck. A Gahanna operation near Taylor Station Road keeps one point of contact for the rack plan this way, instead of sourcing a new vendor every time the building's needs shift.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Cantilever Rack Quote for Your Gahanna Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.