Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

What type of pallet rack do I need?

Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking.

How much weight can cantilever rack hold?

There is no single rating: arm capacity depends on arm length and specification, while column capacity depends on height and the loads carried across the run. We size arms and columns to your heaviest bundle and post the finished capacities on load plaques.

How much does pallet rack cost?

Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote.

Newark, Ohio

Cantilever Rack in Newark, OH

Cantilever rack comes up in Newark when material doesn't fit between a set of pallet frames at all. Industrial manufacturers and aerospace and defense suppliers around Newark Industrial Park and the Port Authority campus along Thornwood Drive regularly move pipe, bar stock, steel coil and other long material that a standard beam system was never built to carry.

Cantilever arms extend out from a column with nothing in front of the load, so long material can be set down or lifted off from the side without threading it between frames. Arm length and spacing get fixed to the bundle sizes actually moving through the building, and because that spacing is permanent once installed, the load profile needs to be settled before the arms go up.

614-379-4436

Why Newark Warehouses Work With Us

The SR-16 corridor near the Heath-Newark-Licking County Port Authority runs through buildings with different column grids and clear heights, from older shells near Thornwood Drive to newer construction near SR-16. Cantilever columns get spaced against whichever building is actually in use, since base spacing determines how much long material a given footprint can hold.

Newark's industrial manufacturers and aerospace and defense suppliers handle material a standard pallet beam can't support cleanly — coil, pipe, bar stock — and single or double-sided arm configurations are chosen based on which side of the structure material is loaded from around Newark Industrial Park and the Port Authority campus.

Working out of Licking County means arm length and bundle dimensions get verified against the real material before the order goes in, since arm spacing can't be adjusted after installation the way a beam level can. We keep site notes and measurements on file after the first visit to Newark, so a follow-up visit or a later phase of the same project does not start from a blank sheet.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the SR-16 / Licking County corridor, Newark Industrial Park, Heath-Newark-Licking County Port Authority, Thornwood Drive, SR-16 corridor.

Data center supply chain

Industrial manufacturing

Distribution

Aerospace and defense

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Newark Cantilever Rack Project Includes

A cantilever rack project for a Newark operation starts with the material itself: length, weight per bundle, handling method, and whether single-sided or double-sided access is needed. Those answers set arm length, arm spacing, column height and base depth.

Arms bolt to a vertical column with no obstruction in front of the load, so bundles of pipe, bar stock, coil or similar material can be set down from the side in one motion instead of being threaded between uprights. Base depth has to account for the column's tendency to tip under an off-center load, which is why base sizing isn't guessed at.

For buildings around Newark Industrial Park and the Port Authority campus along Thornwood Drive, the arm layout is drawn against the actual aisle width and the lift equipment making deliveries, then checked against the bundle dimensions on hand so arm spacing isn't set too wide or too narrow.

Installation crews anchor base plates to the floor, plumb each column, and bolt arms at the specified spacing before the first bundle goes up. Capacity is posted per arm level, and additional arms can sometimes be added to existing columns later depending on how the base was originally sized. Any revisions to the layout after the initial walkthrough are priced and documented before steel is ordered, so the scope stays tied to what was actually measured on site.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Cantilever Rack Quote for Your Newark Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.