How much does carton flow rack cost in Newark?

Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote.

Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The finished rack is anchored to the floor, and load plaques identify the rated capacities.

What type of pallet rack do I need?

Selective teardrop rack is the default for mixed SKUs; pushback is two to six deep, LIFO by SKU; pallet flow is for FIFO or dated stock; drive-in is for bulk storage with few SKUs. Cantilever holds long loads, and carton flow serves case picking.

Can I add carton flow to my existing pallet rack?

Often, if the bay dimensions, connections and complete load configuration suit the flow beds. Send photos of the upright face, beam connector and any label; teardrop connections are not universal across manufacturers, so we check compatibility before quoting new components.

Newark, Ohio

Carton Flow Rack in Newark, OH

Carton flow rack comes up in Newark once case picking outgrows static shelving. Regional distributors and industrial manufacturers around Newark Industrial Park and the Port Authority campus along Thornwood Drive often reach a point where the active SKU count makes constant shelf re-facing a daily task, and that's typically what starts the conversation.

Cases sit on inclined wheel beds built into the lower levels of a standard bay. Each time a picker pulls a case from the front, the next one slides forward to take its place, and replenishment loads the lane from a separate back aisle without crossing the pick line. Reserve pallets commonly sit on the levels above the flow beds, so one bay covers both the pick face and its backup stock.

614-379-4436

Why Newark Warehouses Work With Us

Buildings along the SR-16 corridor near the Heath-Newark-Licking County Port Authority range from older shells near Thornwood Drive to newer construction closer to SR-16, and bay heights differ enough that a carton flow layout needs its own measurements rather than a reused plan.

Newark's regional distributors and industrial manufacturers often carry enough active SKUs that flat shelving turns into constant re-facing. Sizing the wheel beds to the actual carton dimensions moving through Newark Industrial Park and the Port Authority campus, rather than a standard bay width, keeps the pick face usable instead of overcrowded or half-empty.

Operating out of Licking County means carton dimensions, bay heights and replenishment aisle widths are checked against the real building in person, which matters because carton flow lanes are sized tightly and don't forgive a layout built on rough estimates. We keep site notes and measurements on file after the first visit to Newark, so a follow-up visit or a later phase of the same project does not start from a blank sheet.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Carton flow rack with gravity wheel beds and case lanes

Carton flow shelving in use on a warehouse pick line

Operations We Rack Around Here

Nearby areas we work in regularly include the SR-16 / Licking County corridor, Newark Industrial Park, Heath-Newark-Licking County Port Authority, Thornwood Drive, SR-16 corridor.

Data center supply chain

Industrial manufacturing

Distribution

Aerospace and defense

How Carton Flow Rack Works

Cases advance to the picker instead of the picker hunting for cases.

Inclined wheel beds

A full-width wheel bed or roller track sits on a slight incline inside a standard bay, so cases move forward under their own weight without power.

Pick from a fixed position

The picker always reaches for the same forward spot in the lane. Travel time drops, and so does the time spent searching for the next case.

Restock from behind

Replenishment loads the high end of the lane from a separate aisle, so restocking never blocks or slows the pick line, and rotation stays first in, first out automatically.

One lane per SKU

Lane dividers set the width for each case size, giving every SKU its own face - a width that can be resized as your product mix shifts.

What a Newark Carton Flow Rack Project Includes

A carton flow rack project for a Newark operation starts with the cartons: dimensions, weight, and how many active SKUs need a dedicated pick face. Those numbers set the wheel bed width, lane length and how many levels go to flow versus reserve storage.

Cases load onto inclined wheel beds from the back aisle and travel forward as each case is picked from the front. Because the pick aisle and replenishment aisle are separate, a picker working the front of the bay doesn't have to stop for a restocking cart working the back.

For buildings around Newark Industrial Park and the Port Authority campus along Thornwood Drive, the bay layout is drawn against the real column spacing and clear height, with reserve pallet levels stacked above the flow beds where ceiling height allows. That layout is compared to a flat-shelving arrangement on the same footprint so the pick-face gain is visible before ordering.

Installation crews set wheel beds level and anchor the frames, then check carton travel on each lane before loading. Levels are labeled with SKU slot assignments where needed, and lanes can be re-pitched later if carton sizes change without replacing the surrounding frame. Any revisions to the layout after the initial walkthrough are priced and documented before steel is ordered, so the scope stays tied to what was actually measured on site.

Case and each picking operations

Order fulfillment lines carrying many active SKUs

Grocery, beverage, and consumer goods distribution

Kitting and light assembly feed lines

Bays that need reserve pallets stacked above the pick face

Call 614-379-4436

Recent Installations

Racking projects completed for warehouses across Central Ohio.

Drive-in pallet rack system installed in a warehouse — Drive-in pallet rack

Carton flow rack bays with gravity roller beds — Carton flow rack

Tall selective pallet rack rows with wire decking — Selective pallet rack

Warehouse aisle of selective pallet rack with wire decking — Selective pallet rack with wire decking

Newly installed pallet rack rows in an empty warehouse — New warehouse rack installation

Long rows of green and orange selective pallet rack — Selective pallet rack rows

Wide view of a warehouse racking layout with wire decking — Warehouse racking layout

Multiple rows of pallet rack in a distribution warehouse — Pallet rack rows

Cantilever rack with orange arms installed against a warehouse wall — Cantilever rack

Push back pallet rack carts and rails installed in a cold storage room — Push back pallet rack

View More Projects

Get a Carton Flow Rack Quote for Your Newark Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call 614-379-4436.

Columbus Pallet Rack

4551 Wright Ave.

Unit #2092

Columbus, OH 43213

614-379-4436

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Columbus Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.